94' Honda cbr600F2 very rough riding.

[xtan]

Honda cbr600F2 1994.

Wasn't riden for a year but I have got a new battery with fresh oil and it does start well.
When I take off it stalls everytime but if I take off at higher rpm it will go but want to stall at lower rpm.

Can anyone recommend a reasonably priced bike mechanic who know their hondas that is NOR, I live in karrinyup and don't have a bike trailer. Ive been turned off by Rick gills by some mates on their services as it wasn't a good job and quite expensive pricing. They could have just been unlucky but I was hoping for somewhere closer and maybe cheaper.

Or any mech from psb that can help clean and balance the carbies for some quick cash or a carton.

I have cleaned a carby before in my Suzuki gsx250F which was dual carb and I ran into a few small issues and don't wanna go through that again with a quad carb this time.

Cheers,
James

[smeghead]

.. search PSB for mobile mechanics, there are a few peeps recommend, Derek Ball is one that I reacall people seem to be happy with.

That being said check a few easy thing yourself. Bad fuel if its been sitting for a long while; drain tank, flush with good fuel & fill with fresh, then drain carby float bowls. Fuel filter could be blocked/collapsed; replace. Fuel tap, dismantle & clean, can get gummed up. Also make sure the rubber hoses are good.

HTH

[xtan]

.. search PSB for mobile mechanics, there are a few peeps recommend, Derek Ball is one that I reacall people seem to be happy with.

That being said check a few easy thing yourself. Bad fuel if its been sitting for a long while; drain tank, flush with good fuel & fill with fresh, then drain carby float bowls. Fuel filter could be blocked/collapsed; replace. Fuel tap, dismantle & clean, can get gummed up. Also make sure the rubber hoses are good.

HTH

It has bp98 fresh fuel, I thought it could be a fuel filter issue but I don't know how to locate it and all I found online was user manual rather than service manual. That's why I wanna get it looked at by someone with more experience..

Cheers heaps for the help though !!
I'll try grab hold of Damien, what's his user name here?

[I Fancy Holidays]

Does it idle well when cold? Do you have the problem when taking off when the bike is up to temp?

[xtan]

The problem is both, I always let it warm up a few minutes but I have let it reach wot before and no luck. Basically need to ride the clutch and over rev it to not let it stall, in other words it's 100% not rideable, not even to a workshop plus it's unregistered anyway so finding someone to help me prepare it for pits would be awesome.

Only need that issue sorted and new seat wrap/cover and that should be good to go, but there might be more small things that I might not know of.

[monkeyboy]

try gavin at mobile motorcycle medic 0417 945 557. Specializes in Honda good prices as well, sorted my F3 out. can't recommend him enough.

[Para045]

Another one for Derek Ball, he did a major service on my 98 BB and balanced the carbs and seemed to be pretty knowledgeable on the subject