PC3 Repair? Is it possible?

[drfunk]

Erm... sorry, that was a joke

Found! - Electrical Gremlin

thought it might have been....
just tryin you out....

i'm glad to see that your electrical skills rival mine...imagine what we could f*ck up with a few cans under the belt...

[smeghead]

PM Apatheticend, he may be able to help

[ApatheticEnd]

PM Apatheticend, he may be able to help

Unless you can get all of the epoxy fill out, I'm not touching this with a 10ft pole.

You said it's gone bang? Was it hooked up improperly? It's probably possible to repair if you can get all the shit out but I don't want to dick around for 30 hours getting it all out. It wouldn't be worth it as even at ates rates, the time spent digging it out would put you well over the replacement cost.

[drfunk]

mananged to remove all the epoxy in about 40 minutes...
next move is to try and find my aux power connector and try and see if power can be made to run to the board.
i'm not any good with a multimeter trying to determine continuence so i'll have to find someone that is.
hopefully the ECU hasn't gone coz programming is definately not on....

[Chewie]

How did you get the epoxy out?

[drfunk]

peeled it off the circuit board....
was a bastard getting it out of the case but these things are sent to try us

[Desmo]

Really that easy?

[Grinch]

I'll sell you my ZX14 one (Cheap) just wire your plugs on too it !!!


Gr.....

hehe I got it

doesn't respond to direct 9v power, doesn't repond to computer input...
there was a puff of smoke but i didn't see where it came from but i'm assuming that's where...

[drfunk]

I'll sell you my ZX14 one (Cheap) just wire your plugs on too it !!!


Gr.....

thanks for the offer but i'm not sure if it would play the game....

" its not only the wires that are significant its how it talks to the hardware and software in the ecu and the hardware on the bike.
if every ecu had the same chipset and similar software(firmware) , memory and maps and ..........................................
then you'd have a chance" (the ring-in, TLZone 08/07/09)

yosh box here i come....LOL

[drfunk]

Really that easy?

yep...
hell of a lot easier than i thought and was led to believe...

[Desmo]