Tool register

Desmogod · 25-05-2008, 07:49 PM

Hey guys, thought I'd start this up.
If you have any tools you can lend, specialist or not, pop them here.
I have a Ducati clutch basket/drum holding tool if anyone needs to use it.
Ideal for changing clutch baskets, drums, and getting the alternator nut off

Ozboy · 25-05-2008, 08:00 PM

Seriously, I have a 10 tonne truck with a 1 tonne, 10 metre reach, if its needed. We used it at the MAD ride, right Jeff.

You'll need me one day Jimbo. Me and my big tool.

thro · 25-05-2008, 08:08 PM

I haz a torque wrench.

Supercharged1600 · 25-05-2008, 08:09 PM

...dont really lent but ive got pretty much most tools that can be used on premise if required
TIG, MIG, air comp, drilss/grinder/airtools/spray gear, full socket/spanner range basically fully serviced workshop, hoist not in yet

nor is the fridge

barfridge · 25-05-2008, 08:30 PM

yeah, that came in handy

Sean'o · 25-05-2008, 08:34 PM

Ive got the same as supercharged1600, no hoist either but i do have a fridge in the shed

My Tig will weld ally, i will weld subframes or brackets or make up bits and pieces etc but i wont do any welding to main bike frames

RICO · 25-05-2008, 08:43 PM

Full range of handtools plus air compressor/tools, jacks, stands, and a spanner monkey to swing said spanners if needs be!

Have access to mig welding/fabrication facilities if stuff needs fabricating aswell

Will work for beer

Edit: I iz a mechanic, just to clarify tools available

Bart · 25-05-2008, 08:47 PM

Have an engine crane I don't mind lending to the good ppl of the PSB

chief wiggum · 25-05-2008, 09:59 PM

i'm liking this thread. dont really have anything specialised to offer, but i do have a good selection of tools and i dont mind helping people out NOR if they dont have tools or are mechanically inept (for the smaller jobs that is)

Flyboy · 26-05-2008, 07:00 AM

I've got a plethora of tools from cleco clamps and pliers to lock wire pliers. Also have a small air compressor and basic air tools (air drills, die grinders, orbital sanders and whatnot).

Also have a MiG and an arc welder too.

Just ask Barfy..... hes seen a small collection of my kit.

likefry · 26-05-2008, 08:41 AM

I gotta dremel and most hand tools don't mind helping people out if there not to far from leeming.

MuNch · 26-05-2008, 07:05 PM

I had a function gen once,

Then Desmo stole it and never gave it back

potato · 26-05-2008, 09:46 PM

Quote:

Originally Posted by MuNch

I had a function gen once,

Then Desmo stole it and never gave it back

looks like its in the tool register then

Weapon_X · 27-05-2008, 09:24 AM

got tools will travel! more than happy to come around and bring tools and help out. got the normal tool kit, compressor with some air tools. if anyone needs a hand PM me and i'll come and spanner with you with tools

Falcore · 27-05-2008, 05:09 PM

i haz tools

but their all in york lol (so if you need help when up this way..........)

desmo mate

i gotta do some work on the clutch on my duck soon.............

Sprint · 27-05-2008, 06:11 PM

Torx screwdriver tip set.

S.

Falcore · 27-05-2008, 06:57 PM

something that might be handy, ive got a good set of digital vernier callipers an a electric high volume spray gun thingy (works really well)

the[K]id · 28-05-2008, 09:03 PM

Have a valve spring compressor. Also have a big range of odd drive bits (torx, security allen etc) in my work box if anyone gets stuck on something.

duffman · 29-05-2008, 02:26 PM

Quote:

Originally Posted by Falcore

.....ive got a good set of digital vernier callipers .....

how many verniers are in the set?

i got most stuff you need for a bike.
hammer, angle grinder, arc welder, cold chisel etc
will be more than happy to perform basic maintainance on anyones bike

seriously, have got plenty of good stuff.
handtools, rattle gun, spray gun, carb balancer, valve spring compressor, piston ring compressor, few power tools, welder, bearing puller + others

not too keen on letting it walk out of the garage, but can help out in the garage

Supercharged1600 · 29-05-2008, 05:43 PM

oh i forgot - cable crimp (crimping) tool, as in the big f*ck off one that does from 2.5mm-12mm diam stuff. (ie car battery cables, motorbike battery cables etc.

some other specialist tol slike pipe benders/cutters and stuff

25-05-2008, 07:49 PM	#1 (permalink)
Desmogod 2001 Ducati 748R Join Date: Jul 2006 Location: Mexico Posts: 16,375	Tool register Hey guys, thought I'd start this up. If you have any tools you can lend, specialist or not, pop them here. I have a Ducati clutch basket/drum holding tool if anyone needs to use it. Ideal for changing clutch baskets, drums, and getting the alternator nut off __________________ - 2001 748R - Ohlins suspension - Ohlins steering damper - 996 barrels and heads - Vee Two cams - Ported head by Vee Two to corse specs - Vee Two pistons - Vee Two enlarged valves - Titanium I beam conrods - Lightened crank - CF air box and tubes -60mm throttle bodies - 52mm termi system - Corse 4 post slipper clutch -

25-05-2008, 08:00 PM	#2 (permalink)
Ozboy MV F4 1000R Join Date: Apr 2007 Location: North of river Posts: 1,439	Seriously, I have a 10 tonne truck with a 1 tonne, 10 metre reach, if its needed. We used it at the MAD ride, right Jeff. You'll need me one day Jimbo. Me and my big tool. __________________ Sig image has been removed. (Oversize) ... ... 07 MV F4 1000R

25-05-2008, 08:08 PM	#3 (permalink)
thro CBR600RR7, 1.5x VJ22 RGV250 Join Date: Jun 2006 Location: Canning Vale Posts: 9,382	I haz a torque wrench. __________________ CBR600RR \| RGV250 \| 180SX New to riding? Or group riding? -99999121 point(s) total

25-05-2008, 08:09 PM	#4 (permalink)
Supercharged1600 FZR250 Join Date: Oct 2007 Location: SOR Canningvale Posts: 736	...dont really lent but ive got pretty much most tools that can be used on premise if required TIG, MIG, air comp, drilss/grinder/airtools/spray gear, full socket/spanner range basically fully serviced workshop, hoist not in yet nor is the fridge __________________ "Redlines are merely suggestions" "Stroked is fun, but I'ld rather get blown"

25-05-2008, 08:30 PM	#5 (permalink)
barfridge 1998 RGV250 Join Date: Feb 2005 Location: Morley Posts: 13,224	yeah, that came in handy __________________ "Let's think the unthinkable, let's do the undoable, let's prepare to grapple with the ineffable itself, and see if we may not eff it after all." - Douglas Adams

25-05-2008, 08:34 PM	#6 (permalink)
Sean'o Join Date: Sep 2005 Location: NoR Posts: 1,631	Ive got the same as supercharged1600, no hoist either but i do have a fridge in the shed My Tig will weld ally, i will weld subframes or brackets or make up bits and pieces etc but i wont do any welding to main bike frames

25-05-2008, 08:43 PM	#7 (permalink)
RICO '08 Black R1 Join Date: Nov 2006 Location: Canning Vale, Perth Posts: 1,338	Full range of handtools plus air compressor/tools, jacks, stands, and a spanner monkey to swing said spanners if needs be! Have access to mig welding/fabrication facilities if stuff needs fabricating aswell Will work for beer Edit: I iz a mechanic, just to clarify tools available __________________ Designed by a Genius. Built by Craftsmen. Ridden by a TWAT!

25-05-2008, 08:47 PM	#8 (permalink)
Bart 04 Blade 1k Join Date: Dec 2006 Location: NOR Posts: 1,718	Have an engine crane I don't mind lending to the good ppl of the PSB __________________ 10.90 BLADE I'm a flirtalicious Pillions Enquire Within

25-05-2008, 09:59 PM	#9 (permalink)
chief wiggum mine Join Date: Sep 2005 Location: alternating between cowgirl and kj's windaz Posts: 7,260	i'm liking this thread. dont really have anything specialised to offer, but i do have a good selection of tools and i dont mind helping people out NOR if they dont have tools or are mechanically inept (for the smaller jobs that is) __________________ See, this is why you need good friends, in fact, this should be one of the measures of how good a friendship is: Will your buddy let you f#*& a midget in his bed? If the answer is yes, then you know that dude is solid. -Tucker Max Space directive 3.4.1.2.4 No officer with false teeth shall attempt oral sex in zero gravity

26-05-2008, 07:00 AM	#10 (permalink)
Flyboy K8 GSXR1000, Honda Blackbird Join Date: Feb 2006 Location: Vic Park Posts: 1,060	I've got a plethora of tools from cleco clamps and pliers to lock wire pliers. Also have a small air compressor and basic air tools (air drills, die grinders, orbital sanders and whatnot). Also have a MiG and an arc welder too. Just ask Barfy..... hes seen a small collection of my kit.

26-05-2008, 08:41 AM	#11 (permalink)
likefry GSX600F Join Date: Oct 2005 Location: Leeming Posts: 1,066	I gotta dremel and most hand tools don't mind helping people out if there not to far from leeming. __________________ Wes

26-05-2008, 07:05 PM	#12 (permalink)
MuNch Join Date: Jun 2006 Location: Ellenbrook Posts: 1,809	I had a function gen once, Then Desmo stole it and never gave it back

27-05-2008, 09:24 AM	#14 (permalink)
Weapon_X K7 GSX1400 1981 750Z Join Date: Aug 2007 Location: Near the motorplex Posts: 2,642	got tools will travel! more than happy to come around and bring tools and help out. got the normal tool kit, compressor with some air tools. if anyone needs a hand PM me and i'll come and spanner with you with tools __________________ Formerly Team_750Z

27-05-2008, 05:09 PM	#15 (permalink)
Falcore Join Date: Feb 2004 Location: back of beyond Posts: 2,451	i haz tools but their all in york lol (so if you need help when up this way..........) desmo mate i gotta do some work on the clutch on my duck soon.............

27-05-2008, 06:11 PM	#16 (permalink)
Sprint Jota/TZ350/Storm/525EXC/T160V Join Date: Dec 2003 Location: The Future Posts: 1,845	Torx screwdriver tip set. S.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

27-05-2008, 06:57 PM	#17 (permalink)
Falcore Join Date: Feb 2004 Location: back of beyond Posts: 2,451	something that might be handy, ive got a good set of digital vernier callipers an a electric high volume spray gun thingy (works really well)

28-05-2008, 09:03 PM	#18 (permalink)
the[K]id GS550 Katana Join Date: Sep 2006 Location: The garage Posts: 98	Have a valve spring compressor. Also have a big range of odd drive bits (torx, security allen etc) in my work box if anyone gets stuck on something.

29-05-2008, 05:43 PM	#20 (permalink)
Supercharged1600 FZR250 Join Date: Oct 2007 Location: SOR Canningvale Posts: 736	oh i forgot - cable crimp (crimping) tool, as in the big fck off one that does from 2.5mm-12mm diam stuff. (ie car battery cables, motorbike battery cables etc. some other specialist tol slike pipe benders/cutters and stuff __________________ "Redlines* are merely suggestions" "Stroked is fun, but I'ld rather get blown"