2006 Honda CBR600RR

[IDOLYZ]

I have recently converted to bikes from cars as I work in the city, and bought this from Prestige Honda 3 months ago. I thought I'd share it with everyone.

Mods include:
- rear fender eliminator
- Jardine exhaust
- tinted screen
- oggy knobs
- rear seat cowl
- tank protector
- Honda CBR grips

Since I bought it , I have:
- removed the rear footpegs
- purchased and installed rim tape
- purchased and installed flush mount indicators and LED relay

I bought the rim tape, indicators, and LED relay from eBay, and I was happy with all items.

The indicators fit flush with the fairing, and were fairly easy to install, although getting behind the fairings was harder than it looked. The LED relay was a must as they didn't flash without it.

Here are some pics I took last weekend. I will get some better shots at better locations soon.







Any comments or suggestions on what to do next...

Thanks for looking.

[Gixxerguy]

Has that been lowered at back and or front or is it just the fairing making it look lower?

[thro]

looks stock to me, i think the front fairings on teh 06s shroud the wheel a little more than later models...

[Batten]

Do you need to get it dyno tuned after throwing on the exhaust?

mabye a power commander 3, all the cool kids seem to be doing it.

[IDOLYZ]

That's how i bought it, so I'm not sure if it's been dyno tuned or lowered or has a PC3, will have to have a look under the seat/tank (wherever it would be), but i doubt it. That will probably be the next thing, if anything. I'm pretty happy with the power atm.

[valvolux]

Nice bike eh
But adding rim tape & taking off a footpeg is hardly a members project.
Wrong section perhaps?

[IDOLYZ]

Don't forget the indicators... haha. I didn't know where else to post it?

Mods, feel free to move to appropriate section.

[Batten]

That's how i bought it, so I'm not sure if it's been dyno tuned or lowered or has a PC3, will have to have a look under the seat/tank (wherever it would be), but i doubt it. That will probably be the next thing, if anything. I'm pretty happy with the power atm.

my power commander is under the pilion seat.

***Dynojet PC3 USB***

mabye someone with a bit more technial experiance could offer some insight