101Likes
LinkBack URL
About LinkBacksToughen up
And stand back a bit
Toughen up
And stand back a bit
It's better to be thought stupid than open your mouth and remove all doubt
Pure speed in sixth gear on a 5,000 foot straightaway is one thing, but pure speed in third gear on a gravel-strewn, downhill, ess turn is quite another.
Hunter S. Thompson
Has it started yet?
I has a Pitbike frame and complete front end. Take the lot and I will even dump it on Berts work desk FOCOriginally Posted by Barfridge
Kev, I could kiss ya
You've got yourself a deal (as long as I can give you a carton)
For LAMS information and resources - http://www.perthstreetbikes.com/foru...thread-156358/
For LAMS discussion and to ask questions - http://www.perthstreetbikes.com/foru...thread-143289/
my mosly intact skin and i thank you
A motorcycle is a joy machine. It's a machine of wonders, a metal bird, a motorized prosthetic. It's light and dark and shiny and dirty and warm and cold lapping over each other; it's a conduit of grace, it's a catalyst for bonding the gritty and the holy.
Kev, I could kiss ya
You've got yourself a deal (as long as I can give you a carton)
Done and Delivered.
So when are you, me and Bert going to drink this said carton?
I think you need to put in a clause that you'll only donate the front end if the plastics are kept pink.
shush Dion!
Kev: that is definitely required, I shall be in touch.
Last edited by Barfridge; 27-06-2012 at 02:06 PM.
For LAMS information and resources - http://www.perthstreetbikes.com/foru...thread-156358/
For LAMS discussion and to ask questions - http://www.perthstreetbikes.com/foru...thread-143289/
Of course the plastics will stay pink. I've also had it arranged that Frangipanis will be airbrushed onto the tank.
Now. The burning question:
Will said contraption have an afterburner?
This guy does.
Come to the dark side. We have Bacon.
bump...
A motorcycle is a joy machine. It's a machine of wonders, a metal bird, a motorized prosthetic. It's light and dark and shiny and dirty and warm and cold lapping over each other; it's a conduit of grace, it's a catalyst for bonding the gritty and the holy.
I have the front end, thanks to Kev. Kev doesn't have beer yet, no thanks to me
I'll be visiting Munkers over the weeked to pick up the powerplant, then the fabrication can begin.
For LAMS information and resources - http://www.perthstreetbikes.com/foru...thread-156358/
For LAMS discussion and to ask questions - http://www.perthstreetbikes.com/foru...thread-143289/
This afternoon I spent an hour with Munkers, giggling like school kids over the stuff we are going to do.
I now have a little turbine engine.Should produce an additional theoretical 12-15hp over the 6-7 I already have.
It will make lots of noise, it will shoot flames, it's so many kinds of awesome.
For LAMS information and resources - http://www.perthstreetbikes.com/foru...thread-156358/
For LAMS discussion and to ask questions - http://www.perthstreetbikes.com/foru...thread-143289/
Can we cook bacon whilst on the move
REPENT MOTHER FUCKER
(anarchy in english )
Always asking the important questions.
Barfy, answer the man!
Of course you can cook bacon... just need to be careful, that jet exhaust is 600+ degrees at 600+ km/h
For LAMS information and resources - http://www.perthstreetbikes.com/foru...thread-156358/
For LAMS discussion and to ask questions - http://www.perthstreetbikes.com/foru...thread-143289/
We can cook it quickly then..
Can we have some pics of the mini turbine? (aviation tech giggling with anticipation here)
Maybe consider putting a bellmouth inlet duct on the jet. Its the most efficient duct type for slow moving jets (at static, the duct losses are so slight they can be considered zero).
A cynic is a man who, when he smells flowers, looks around for a coffin.
Dear god, it's some weird bastardized three wheeled two person go-kart.
idle speed 33,000 rpm
max speed 126,000 rpm
rated thrust 13.1 kg @ 126,000 RPM
It's small, about the size of a small milo tin. Maybe 40cm long.
Really can't wait to hear it fired up
For LAMS information and resources - http://www.perthstreetbikes.com/foru...thread-156358/
For LAMS discussion and to ask questions - http://www.perthstreetbikes.com/foru...thread-143289/
Awesome..
Posting Permissions
Copyright 2011 © PerthStreetBikes.com Pty Limited (ACN 127 435 858)
By using this website, you are indicating your acceptance of the TERMS OF USE
Technical Services by Parity Networks
Reply With Quote
Bookmarks