Anyone got an RGV250 VJ22 rear brake setup?

[JonW]

Ive been searching for a rear brake setup for a VJ22 for a while but am struggling to locate a decent set of parts, especially as considering the crazy postage Id like them to already be in Aus. Ideally id like the whole thing from the mater cyclinder to the caliper and all the brackets, but if all else fails id like the carrier bracket (axle passes through it) and the caliper+slider bracket (or is there one from some other bike that fits?! I cant find anything similar in my search)... Im sure i can work the rest up from other things i have here...

Thanks guys!

[JonW]

Thanks to those who PM'd, and a little clarification... The setup im after was only fitted on the VJ22 and its what fits my 'P' model swingarm. It does not have a torque arm like the VJ21 instead the caliper hanger locates in a tang on the swingarm, and is a tandem twin caliper caliper not a single pot like the other models.

Hopefully these pics from the parts book help:

Caliper bracket:


Caliper, showing the side by side pistons and also the slider bracket that the caliper hangs from, which in turn bolts to the bracket in the pics above.


Cheers guys!

[180]

have you spoken to Deet at RGV250 RG500 250cc two strokes parts RGVspares.com - Home