LinkBack URL
About LinkBacksHi Guys,
Looking for expansion chambers for an RD 250 if any one can help new or used and also some rearsets.
Cheers
Sean
Hi Guys,
Looking for expansion chambers for an RD 250 if any one can help new or used and also some rearsets.
Cheers
Sean
...
Last edited by Evil Dwarf; 02-02-2012 at 03:34 PM.
is it for your 78??? or do you have a G model as well? The DG's some say will work with the 250 are built for the 350a and b and the mounting brackets have to be cut and moved, unless you cut your centerstand brackets off then they will scrape badly when the bike is pushed.
Last edited by D.J; 11-12-2011 at 08:36 PM.
There are two questions in life.
1:Which way do I go
2:Whats the lap record.
Its for a 1980 model which is a rd 250g the 1978 model was my old bike. It is a similiar frame as a 400 daytonta but I need the pipes to suit a 250 engine. It is an Australian model so I am told so have had no luck with pipes from the states.
send Dave sawrbricvk from Swarbrick racing an email, he may be able to help with a kit. unless the E model stuff fits there may not be a manufacturer that makes them for G's.
There are two questions in life.
1:Which way do I go
2:Whats the lap record.
Cool I have sent Dave an email see what happens.
No luck with Dave he only does RD race bike pipes.
the other option is to talk to martin from Highside Trading, he has a guy that makes pipes (aparently the ex all speed guy) and may do a set for a G model.
There are two questions in life.
1:Which way do I go
2:Whats the lap record.
Posting Permissions
Copyright 2011 © PerthStreetBikes.com Pty Limited (ACN 127 435 858)
By using this website, you are indicating your acceptance of the TERMS OF USE
Technical Services by Parity Networks
Reply With Quote
Bookmarks