Wanted: NSR250

[greggo]

Anyone out there know of anyone with an NSR up for grabs?

Looking for an MC18 or later (Would actually prefer the MC21) to do the full Tyga works too, including 300cc kit.

Shabby, smashed fairings and rattly pistons rings, leaking forks, blown shocks, are a non issue...everything will be getting the freshness.

[Loud]

1990 MC21 on Gumtree for $1500.

[greggo]

Yeah, saw it but WA is a bit far from Melbourne to toddle over and pick it up. Otherwise it would be ideal.

Sent from my GT-I9100 using Tapatalk

[rgvlee]

What did you expect from a WA forum?

[greggo]

Thank you Captain Obvious.

You might take the time to notice though, somehwere in the 4000 posts you made, there are a lot of non WA based people on here as well.

[rgvlee]

No problems, glad I could help.

The vast majority of active people round here are WA based.

In any case if you were looking for a bike over east only then maybe specifying that particular point in your OP would have been beneficial.

[drifter]

next time just make it really obvious for those of us that read the content of the thread and don't necessarily read the join date, location, bike type and amount of posts for every posted thread.
save everyone the hassle and write.
PS I'm from MELBOURNE

serial.

[greggo]

Yeah. Fair call. My apologies for being such a wanker above.

Mind you if transport costs aren't outlandish, WA ain't outta the picture.

Sent from my GT-I9100 using Tapatalk

[BlackFZR]

Transport costs from Perth to Melbourne are cheaper than from melbourne to perth.......

[Loud]

There's an MC18 on eBay for $3,500 in QLD if that sounds any better? And that's about it.

If you want to do the Tyga thing properly then you want an MC21.

I looked out for an MC21 for several months. 6 were for sale during that time - 2 in SA, 2 in VIC, 1 in NSW and 1 in QLD. Prices varied from $2,000 (unlic track bike) to $9,000 (Tyga kitted). They sell very quickly when priced right. The 2 in SA were dry clutch models, the rest were wet.

$1,500 for a Dry Clutch MC21 is a bargain. If it's running at all then it's a steal. Freight from WA to VIC is deemed as "Back load", it costs less as they're happy to have something in the back of the truck for the drive home.

But if you're not interested then someone should PM Thro, he's in Perth and would love one of these. It'd be mine if I hadn't bought the RS250.

[Gangus]

im in two minds about it.........
learn all about the nsr, track it cause thats what there made for,
but have to slap the kr-1s together that I bought before I get another.
And 1500 hundred puts together a kwaka.... ahhh!
or buys some consumables for next years track attack

[greggo]

Yeah. The bike itself looks like a good base to start from. I've been calling round the bike movers and prices are pretty standard. Seller is reasonably happy to accommodate the faffing around with a transporter.

Any recommendations?

Sent from my GT-I9100 using Tapatalk

[Deicide]

Spoke to the guy before, sounded dodgy as.-Crazy european accent,-
Me- does it run?
Him- it cannot be started as fuel tank not connected
Me- Ok so it just needs the fuel tank connected and it will run
Him- No its in bits, you cannot ride it, it is unregistered
Me- Ok, but is the motor ok?
Him- I don't know
Ahhhh Ok??

He mention some people where looking at it this week so i suspect it would sell, even just for parts?

[Mariuszfc20b]

ebay maybs?

[greggo]

I've decided to use these blokes and bring one in:

Www.importmonster.com.au

I will keep you posted on the experience.

Sent from my GT-I9100 using Tapatalk

[Gangus]

Can they import bikes yet?
Talk to scotts motorcycles over east, they get em
in.

[maximum]

Got a 21 and an 18 unfortunately in Thailand which is near Australia ?







I can ship it in as parts ?

[greggo]

Hi Gangus,

They can import them but they are imported as parts and can only be used on track due to the difficulties getting compliance for the road.

Bloke i talked to seemed friendly and helpful so I'll let everyone know what the experience is like. It looks like they do lots of boy racer stuff for the 4 wheel set...

No issue for me i'm planning the tyga works and a replica paint job (pot noodle maybe) for a track/race bike.

Sent from my GT-I9100 using Tapatalk

[Gangus]

good to know.
Checked out their site and have seen some very cool parts come up, but they advised that you can only browse bike auctions at the moment.

[greggo]

So this:
¡ù¡ù¡ù¡¡£Î£Ó£Ò£²£µ£°£Ò¡¡£Í£Ã£²£±¡¡Í×À°È÷¤Ç¤¹¡¡¡ù¡ù ¡ù - Yahoo!¥ª¡¼¥¯¥·¥ç¥ó

has been acquired on my behalf. There are a couple of interesting things, like rigid footpegs and no exhaust hangers, plus no mileage is mentioned in the Ad that I could see. I'm planning a top end rebuild at least so not overly ocncerned. It still looks like a relatively clean straight bike.

Bike cost is about $1860, once I have full cost of import and fees i'll let you know.