User Tag List

Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 1 of 1

Thread: Big Dog Mastiff

  1. #1
    Member R160's Avatar
    Join Date
    Jun 2003
    Benelli Tornado 900RS (Sadlt Sold), TnT R160 & Victory Judge :-)
    311 times
    Post Thanks / Like
    3 Post(s)
    0 Thread(s)

    Big Dog Mastiff

    Hi all, I have a Big Dog Mastiff up for Sale. its a Australian compliance chopper brought into the country by a good friend.

    I believe its a 2006 model and its got approx 10,000 kms on the clock. although I will confirm all this when I get home later tonight.

    for the specs of what these bikes are I some details below.
    2 valve 45 degree S&S motor with a 117 cubic inch capacity (1916cc).
    S&S carb.
    6 speed baker balance drive transmission.
    toothed wide belt primary drive.
    37 degree rake.
    soft-tail rear end with twin shocks under the frame.
    Performance machine four piston caliper up front with a single at the rear.
    brembo discs front and rear.
    120/70 tire on a 21" front rim.
    rear is a 250mm wide tire on a 18" rim.
    forged Billet wheels.
    dry weight 300kgs.
    17.5l fuel tank.
    2.8L oil tank.
    Brand new SSB 310CCA battery just fitted.
    Optional Big Dog Oil cooler fitted.
    Tyres are all good with plenty of tread left.
    also comes with a factory Big Dog luggage bag, 2 additional seats which incorporates a pillion seat with the riders, one more padded than the other and a set of pillion pegs.
    Originally it had a side mounted license plate but apparently this isn't permitted in west oz so a simple bracket was made up to mount a plate with the required stop light and plate light, but I'm sure a set of small billet indicators and a LED strip stop / tail light could be easily purchased to make for a cleaner rear end. the factory side billet license plate mount comes with the bike.
    Dog Dog in Kansas did close down for a few years due to the GFC but are back in business these days so parts are available, mind you most of the parts are available from performance machine, baker, S&S etc anyhow.

    Currently it have a stock baffled HD exhaust on it to pass noise regs but it comes with a set of vance and hines downward swept pipes as were fitted to it when it comes into the country. it was also complianced with these pipes but we had to have the stock HD pipes fitted to pass noise regs when we had the rego renewed.

    services a few weeks ago at Motorcycle masters and then detailed by Rob at Clean ride.

    Power, lords knows, more than enough, torgue ..Plenty...
    Sounds epic with the original V&H pipes back on.
    Test rides, probably not. I'm selling it on behalf of the owner. Payment would be made to them and then to bike can be taken. Available for viewing at my place.

    A review of them is located here:
    Price $27K
    Contact Nathan on 047 861 8181.
    photos can be viewed here.
    Last edited by R160; 17-07-2017 at 04:59 PM.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts